SS-200 | IN-SINK-ERATOR | COMMERCIAL

Rs.3,58,800/-

* M.R.P (Inclusive of all taxes. Subject to change without prior notice.)

INSINKERATOR SS-200 [ Small Capacity: Up to 200 persons per meal ]

  • Corrosion resistant stainless steel grind chamber
  • 3/4″ (19.1 mm) rubber mounting above grinding chamber, enclosed in chrome plated covers for sanitation and appearance
  • 1-1/2 to 2 H.P. induction motor with built-in thermal overload protection, 1725 RPM, totally enclosed to provide protection against outside moisture with controlled power air flow to cool motor—provides better efficiency, longer life
  • Cast nickel chrome alloy stationary and rotating shredding elements for long life and corrosion resistance, designed for reverse action grinding
  • Double-tapered Timken roller bearings provide a shock absorbing cushion
  • Triple lip seal protects motor from water damage and secondary spring-loaded oil seal provides double protection against water and loss of grease
  • Stainless steel and chrome plated finish—paint-free for lasting sanitation

Ideal For Light Duty Applications

  • Restaurants
  • Healthcare & hospitals
  • Schools & universities
  • Travel & leisure

What’s Included

  • Base disposer: 1 mounting gasket, support legs
  • Disposer packages: 1 mounting/bowl assembly, 1 electrical control, 1 syphon breaker, 1 solenoid valve, and 1 flow control valve (the standard flow control valve will be sent with the unit unless the optional valve is specified)
Overall Height 18″ 1/2′ Inches
On/Off Control Wall Switch
Motor 2 HP
Amps 2.5 – 5 Amps
Voltage 208-230/460
Wattage 759 – 1,150 Watts
RPM 1725
Water Usage 7 GPM (26.5 LPM)
Grind Chamber Stainless Steel
Power Type Electric
ELECTRICAL SPECIFICATIONS
  • 115/208-230V, 60 Hz, 1 Ph, 17.4/7.7/8.7 amps, CUL
  • 208-230/460V, 60 Hz, 3 Ph, 3.3/5.0/2.5 amps, CUL
  • 115/208-230V, 60 Hz, 1 Ph, 17.4/7.7/8.7 amps, CUL, short body
  • 208-230/460V, 60 Hz, 3 Ph, 3.3/5.0/2.5 amps,CUL, short body
  • 208-240/460V, 60 Hz, 3 Ph, 3.3/5.0/2.5 amps,NOM
MODEL SS-100
BowlSinks Flange O.D.(X) Work Table Hole(Y) Flange I.D.(Z) Height
12″(304.8 mm) 13-1/2″ (342.9 mm) 12-1/4″(311.2 mm) 12″(304.8 mm) 6-1/2″(165.1 mm)
15″(381 mm) 16-1/2″(419.1 mm) 15-1/4″(387.4 mm) 15″(381.0 mm) 6-1/2″ (165.1 mm)
18″(457.2 mm) 19-1/2″ (495.3 mm) 18-1/4″(463.6 mm) 18″(457.2 mm) 6-1/2″ (165.1 mm)
Adaptors X Y Z Height
No. 5 Fits Standard Sink Opening: 3-1/2″ – 4″ (88.9 mm – 101.6 mm) 2-3/4″(69.9 mm)
No. 6 7-13/16″(198.4 mm) 6-7/8″(174.6 mm) 6-5/8″(168.3 mm) 1-3/16″(30.2 mm)
No. 7 9-1/8″(231.8 mm) 7-7/8″(200.0 mm) 7-5/8″(193.7 mm) 2-1/16″(52.4 mm)

IMPORTANT: Use dimension chart below for adaptor height in place of InSinkErator bowl sink height when mounting directly to a sink.

NOTE:

  • Adaptors are available upon request for all competitor sink bowls or cones.
  • Please have sink bowl/cone type with the necessary dimensions when ordering adaptors.
WATER USAGE
Standard Optional
SS-100 7 GPM (26.5 LPM) 5 GPM (18.9 LPM)

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

© 2017 Equus Enterprises LLP | Developed by : Divine Infoservices

Watch Dragon ball super

Forgot your details?